Linear module has its own load weight, horizontal load and vertical load. Different linear module types have different load sizes, so what are the factors that affect the load of linear module?

1. When we choose it, we should consider whether it is a horizontal load or a vertical load. When the thrust is the same, the vertical load receives a downward pull due to gravity, and the weight it can carry is different. When the load is exceeded and the brake is not applied in time, the machine may be damaged or even personal safety may be caused.

2. We need to know the static load value and the dynamic load value of the linear module, so we need to know the internal structure and each model of the linear module. We can find the manufacturer's selection data, which are generally marked in the selection data book. Usually we see the limit load value of the operation

3. Screw module or synchronous belt module linear module is divided into screw module and synchronous belt module due to different transmission parts. The width of general profile is different, and its stress value is different. The rigidity of general screw module is relatively strong, which can be used for heavy load operation, while the synchronous belt is light load module

4. The bearing capacity of aluminum profile has many kinds of travel of linear module of synchronous belt, such as 40mm 45mm 50mm 60mm 80mm 100mm, etc. the wider the profile is, the stronger the bearing capacity is. If the load is overweight, it will deform and cause unnecessary loss

5. Acceleration of linear module movement. Under the same specification, the larger the acceleration, the smaller the weight it can carry.

Generally, the factors that affect the load of linear module are these points. Of course, the specific and important ones depend on the use. The specific scene of the clamp should also be analyzed specifically. In a word, the bearing capacity of linear module is not only a single factor, but also the result of the comprehensive factor composed of the overall hardware structure. Even though the lead is the same, the thrust is the same, but if the installation mode is different, it The load value of is not the same, which needs to be selected according to the standard of the results obtained from the professional mechanical calculation method, so as to make the product better and play its value.