Four points for attention in installation of linear guide rail
The installation of the linear guide rail is very important for our machinery, so we should pay attention to some matters during the installation, so as to prevent the unexpected occurrence of our machinery during the operation; when using and installing the linear guide rail, we should be careful, do not allow the strong stamping, do not allow the direct impact of the hammer on the guide rail, and do not allow the transmission of pressure through the rolling body. The installation tools shall be suitable, and the linear guide rail shall use appropriate and accurate installation tools, and special tools shall be used as far as possible, and cloth and short fiber and other things shall be avoided as far as possible. For the installation of linear guide rail, we must pay attention to some details. If we do not pay attention, it may cause problems in the application.
Let's talk about it in detail.
Note 1: if it is an interchangeable product, the slider is mainly temporarily installed on the shaft for use, which needs special attention when assembling with the linear guide rail.
Note 2: because sometimes it is necessary to tilt the linear guide rail when operating, the slider will move, so we should pay attention to the slide phenomenon.
Note 3: the end cover of the standard linear guide rail is made of plastic. If it is collided or knocked with a little force, it is easy to cause damage, so pay more attention during the operation.
Note 4: if the linear guide rail is disassembled without permission, because dust will enter during the disassembly process, which will reduce the accuracy of each part in the assembly. Therefore, if it is not a special case, it is recommended not to disassemble the linear guide rail without permission.
After the installation of our linear guide rail, we need to maintain the clamp after a period of time, so as to protect our linear guide rail for a long time and extend its service life.
- The reason and solution of noise in the running of linear guide rail 2019-11-11
- How to select the linear guide correctly 2019-05-22
- Basic knowledge of linear guide 2019-05-22
- How to clean the linear guide? 2019-05-22
- Choosing the right linear guide needs to look at these! 2019-12-31
- Precautions and troubleshooting of linear guide 2019-05-22
- Introduction to linear guide 2019-05-22
- How to ensure the accuracy of linear guide 2019-05-22
- Installation procedure of linear guide rail 2019-05-22